DS40G
This Type 2 AC surge protector is designed to be associated with DS10 or DS40 surge protector to order to provide a common and differential mode protection, following the CT2 configuration (IEC 60364-5-534). refer pages A31 and A33. The DS40G is connected only between Neutral wire (N) and Protective Earth wire (PE).
This Type 2 AC surge protector is designed to be associated with DS10 or DS40 surge protector to order to provide a common and differential mode protection, following the CT2 configuration (IEC 60364-5-534). refer pages A31 and A33. The DS40G is connected only between Neutral wire (N) and Protective Earth wire (PE).
The internal protection component is a specific gas tube which allows high discharge current in 8/20μs wavaform and low residual voltages. The DS40G is made a fixed base and a plug-in module in order to comply mechanically with the DS10/DS40 range.
Type 2 N/PE surge protectors
DS40/DS10 series compliance
Discharge currents : In : 20 kA/Imax : 40 kA
Plug-in or non pluggable
Comply IEC 61643-1 and EN 61643-11
Type 2 N/PE surge protectors
DS40/DS10 series compliance
Discharge currents : In : 20 kA/Imax : 40 kA
Plug-in or non pluggable
Comply IEC 61643-1 and EN 61643-11
